Metalwork - Exam Papers - HL - Project - 2008 - 
Instructions
- Details of a Model Quad Bike are shown on the accompanying drawing.
- Make and assemble the Project using the materials specified in the Parts List.
- Bond the Wheels (Part 5) to the axle of the gearbox.
- Design, make and attach, a suitable Front Wheel Support and Steering Mechanism for the model.
(Note : 20% of the marks will be awarded for this section.)
- Complete, test and solder the Electric Circuit, so that the LED is lighting when the model is in reverse.
- Your Examination Number must be clearly engraved on the surface of the Battery Holder (Part 7) as indicated.
- Your completed project, clearly identified with your Examination Number, must be available to the visiting examiner along with the necessary testing equipment (battery or transformer).
As Supplied
| Part No. |
Part Name |
Required |
Material and Description |
| 12 |
M4x6 Pan Head Screw |
6 |
Brass or Steel |
| 13 |
M4x16 CSK Head Screw |
2 |
Brass or Steel |
| 14 |
M4 Hex Nut |
4 |
Brass or Steel |
| 15 |
M5 Hex Nut |
1 |
Brass or Steel |
| 16 |
M5 Cap Nut |
1 |
Brass or Steel |
| 17 |
Motor Holder |
1 |
Self Adhesive Type |
| 18 |
Motor |
1 |
Ø24 x 27 |
| 19 |
Simple Gearbox |
1 |
As Supplied |
| 20 |
Switch |
1 |
DPDT |
| 21 |
LED |
1 |
Red |
| 22 |
LED Holder |
1 |
As Supplied |
| 23 |
Resistor |
Resistor
1 |
330 Ω |
| 24 |
Battery Clip |
1 |
PP3 |
| 25 |
Insulated Wire |
1 |
As Supplied |
Design Element
| Part No. |
Part Name |
Required |
Material and Description |
Possible Design |
| 26 |
Front Wheel Support and Steering Mechanism |
1 |
As Designed |
 |
Zip Files
Download all Solidworks Parts : - 2.2 MB
Download all Solidworks Drawings : - 2.1 MB
Download all PDFs of Solidworks Drawings : - 1.3 MB
Download Solidworks Assembly including all Parts : - 13.1 MB
Download Assembly Pictures : - 563 KB
Download All : - 17.1 MB
