Metalwork - Exam Papers - OL - Project - 2003 - 
300 Marks
Instructions
Details of a Model Aeroplane are shown on the accompanying drawings.
1. MAke and assemble the project using the materials specified in the Parts List.
2. Assemble Parts 4 and 5 and push into Part 2. This allows access to batteries.
3. Design, make and attach a Support for the Tail Wheel.
4. Complete the electric circuit and test with 2 x 1.5V AA batteries.
Parts List
| Part No. | Part Name | Required | Material and Description | Solidworks Part | Solidworks Drawing | |
| 1 | WING | 1 | ALUMINIUM, COPPER OR BRASS |  |
 |
 |
| 2 | FUSELAGE | 1 | ALUMINIUM, COPPER OR BRASS | |
|
|
| 3 | UNDERCARRIAGE | 1 | ALUMINIUM, COPPER OR BRASS | |
|
|
| 4 | TAIL WING | 1 | ALUMINIUM, COPPER OR BRASS | |
|
|
| 5 | TAIL FIN | 1 | ALUMINIUM, COPPER OR BRASS | |
|
|
| 6 | TAIL WHEEL | 1 | ALUMINIUM OR NYLON | |
|
|
| 7 | WHEELS | 1 | ALUMINIUM OR NYLON | |
|
|
As Supplied
| Part No. | Part Name | Required | Material and Description |
| 8 | SWITCH | 1 | AS SUPPLIED (Ø5MM) |
| 9 | AA BATTERY HOLDER | 1 | AS SUPPLIED |
| 10 | MOTOR | 1 | 1.5V - 3V Ø24X27 |
| 11 | PROPELLOR | 1 | AS SUPPLIED |
| 12 | INSULATED WIRE | AS REQUIRED | AS SUPPLIED |
| 13 | Ø3.2 POP-RIVET | 3 | ALUMINIUM |
| 14 | M3X12 SET SCREW | 5 | BRASS OR STEEL |
| 15 | M3 HEX NUT | 3 | BRASS OR STEEL |
| 16 | M3 LOCKNUT | 3 | STEEL |
Design Element
| Part No. | Part Name | Required | Material and Description | Possible Design |
| 17 | TAIL WHEEL SUPPORT | 1 | AS DESIGNED | |
Zip Files
Download all Solidworks Parts : - 1.4MB
Download all Solidworks Drawings : - 1.9MB
Download all PDFs of Solidworks Drawings : - 421kB
Download Solidworks Assembly including all Parts : - 14.1MB
Download Assembly Pictures : - 410KB
Download All : - 16.7MB
