Metalwork - Exam Papers - OL - Project - 2002
300 Marks
Instructions
Details of of a Model Supersonic Jet are shown on the accompanying drawings.
1. Make and assemble the project using the materials specified in the PArts List.
2. Part 3 must be securely attached to Part 2.
3. Design, make and attach a base, not exceeding the dimensions given.
4. Complete the electronic circuit and test with a 6-9 volt battery.
Parts List
| Part No. | Part Name | Required | Material and Description |
| 1 | WING | 1 | COPPER, BRASS OR ALUMINIUM |
| 2 | FUSELAGE | 1 | ALUMINIUM OR BRASS |
| 3 | TAIL FIN | 1 | COPPER, BRASS OR ALUMINIUM |
| 4 | ENGINES | 1 | ALUMINIUM |
| 5 | STAND | 1 | ALUMINIUM OR STEEL |
As Supplied
| Part No. | Part Name | Required | Material and Description |
| 6 | LED | 2 | Ø5MM RED FLASHING |
| 7 | SWITCH | 1 | AS SUPPLIED |
| 8 | BATTERY CLIP | 1 | AS SUPPLIED |
| 9 | INSULATED WIRE | AS REQUIRED | AS SUPPLIED |
| 10 | SCREWS | 2 | BRASS OR STEEL TO ATTACH PART 5 TO BASE |
| 11 | M4X12 SET SCREW | 1 | BRASS OR STEEL |
| 12 | M4X16 CSK SCREW | 1 | BRASS OR STEEL |
Design Element
| Part No. | Part Name | Required | Material and Description |
| 13 | BASE | 1 | AS DESIGNED THICKNESS : 3MM TO 12MM |
Zip Files
Download Solidworks Parts, Solidworks Drawings, PDFs of Drawings. 3D images.
