Metalwork - Exam Papers - HL - Project - 2001
150 Marks
Instructions
Detail of a Model Helicopter are shown on the accompanying drawings.
- Make and assemble the project using the materials specified in the Parts List.
- Design : Make and attah a seat for the helicopter.
- Complete the electrical circuit and test with a 6V battery.
Parts List
| Part No. | Part Name | Required | Material and Description |
| 1 | BASE | 1 | ACRYLIC |
| 2 | CAB | 1 | ALUMINIUM, BRASS OR COPPER |
| 3 | TAIL SECTION | 1 | ALUMINIUM, BRASS OR COPPER |
| 4 | LANDING SKIDS | 2 | ALUMINIUM, BRASS OR COPPER |
| 5 | SUPPORTS | 4 | ALUMINIUM OR BRASS |
| 6 | TAIL ROTOR | 1 | ALUMINIUM, BRASS OR COPPER |
| 7 | BATTERY HOLDER | 1 | ALUMINIUM, BRASS OR COPPER |
As Supplied
| Part No. | Part Name | Required | Material and Description |
| 8 | MOTOR | 1 | 3V - 6V |
| 9 | SWITCH | 1 | AS SUPPLIED |
| 10 | BATTERY | 1 | AS SUPPLIED |
| 11 | PROPELLOR | 1 | AS SUPPLIED |
| 12 | M3 x 25 CSK SET SCREWS | 4 | STEEL OR BRASS |
| 13 | M3 x 10 PAN HEAD SET SCREW | 1 | STEEL OR BRASS |
| 14 | M3 x 6 PAN HEAD SET SCREWS | 3 | STEEL OR BRASS |
| 15 | M3 HEX NUTS | 5 | STEEL OR BRASS |
| 16 | M3 CAP NUTS | 4 | STEEL OR BRASS |
| 17 | BATTERY CONNECTOR | 1 | AS SUPPLIED |
| 18 | INSULATED WIRE | AS REQUIED | AS SUPPLIED |
Design Element
| Part No. | Part Name | Required | Material and Description |
| 19 | SEAT | 1 | AS DESIGNED |
Zip Files
Download Solidworks Parts, Solidworks Drawings, PDFs of Drawings. 3D images.
