Metalwork - Exam Papers - OL - Project - 1999 - 
300 Marks
Instructions
Details of a Motorised Model Aeroplane are shown in the accompanying drawings.
1. Make the project using the material specified in the Parts List.
2. Assemble the Parts using pop-rivets, set screws and nuts.
3. Colour the wing section, Part 1, to your own individual design.
4. Complete the electrical circuit and test.
Parts List
| Part No. | Part Name | Required | Material and Description | Solidworks Part | Solidworks Drawing | |
| 1 | WING | 1 | ALUMINIUM |  |
 |
 |
| 2 | TAIL WHEEL SUPPORT | 1 | ALUMINIUM | |
|
|
| 3 | FRONT WHEEL SUPPORT | 2 | ALUMINIUM | |
|
|
| 4 | FRONT WHEELS | 2 | ALUMINIUM | |
|
|
| 5 | REAR WHEELS | 1 | ALUMINIUM | |
|
|
| 6 | BATTERY HOLDER | 1 | ALUMINIUM | |
|
|
| 7 | MOTOR HOLDER | 1 | ALUMINIUM | |
|
|
As Supplied
| Part No. | Part Name | Required | Material and Description |
| 8 | SWITCH | 1 | AS SUPPLIED |
| 9 | PROPELLOR | 1 | AS SUPLIED |
| 10 | MOTOR | 1 | 3V - 6V (24X31 Ø2MM SHAFT |
| 11 | M3X20 SET SCREW | 1 | BRASS OR STEEL |
| 12 | M3X10 SET SCREW | 2 | BRASS OR STEEL |
| 13 | M3X6 SELF-TAPPING SCREW | 1 | BRASS OR STEEL |
| 14 | M3X10 CSK SCREW | 1 | BRASS OR STEEL |
| 15 | M3X15 SET SCREW | 1 | BRASS OR STEEL |
| 16 | M3 HEX NUTS | 4 | BRASS OR STEEL |
| 17 | M3 LOCKNUTS | 4 | STEEL |
| 18 | BATTERY CLIP | 1 | AS SUPPLIED |
| 19 | INSULATED WIRE | AS REQUIRED | AS SUPPLIED |
| 20 | Ø3 POP RIVET | 8 | ALUMINIUM |
Zip Files
Download all Solidworks Parts : - 2.1MB
Download all Solidworks Drawings : - 1.8MB
Download all PDFs of Solidworks Drawings : - 321kB
Download Solidworks Assembly including all Parts : - 11.1MB
Download Assembly Pictures : - 445KB
Download All : - 13.8MB
