Metalwork - Exam Papers - OL - Project - 1997 - 
300 Marks
Instructions
Details of a Model Desk Lamp are shown on the accompanying drawings.
1. Make the Project using the materials specified in the Parts List.
2. Assemble the parts using the set screws and nuts supplied.
3. Bond Part 5 to Part 2 using a suitable adhesive.
4. Join Part 14 to Part 7 either by adhesive or set screw(s).
5. Design, make and attach a suitable "Battery Holder" behind Part 2.
6. Complete the electrical circuit and test the lamp using a 9 volt battery.
Parts List
| Part No. | Part Name | Required | Material and Description | Solidworks Part | Solidworks Drawing | |
| 1 | BASE | 1 | PERSPEX |  |
 |
 |
| 2 | SUPPORT | 1 | PERSPEX OR ALUMINIUM | |
|
|
| 3 | SHADE | 1 | BRASS OR ALUMINIUM | |
|
|
| 4 | BRACKET | 1 | BRASS OR STEEL | |
|
|
| 5 | BUSH | 1 | BRASS OR NYLON | |
|
|
| 6 | SWIVEL | 1 | STEEL OR BRASS | |
|
|
| 7 | BULB HOLDER EXTENSION | 1 | NYLON | |
|
|
As Supplied
| Part No. | Part Name | Required | Material and Description |
| 8 | M3X15 SET SCREW | 1 | BRASS OR STEEL |
| 9 | M5X6 SET SCREW | 1 | BRASS OR STEEL |
| 10 | M5X12 SET SCREW | 3 | BRASS OR STEEL |
| 11 | M5 CAP NUTS | 2 | BRASS OR STEEL |
| 12 | M5 LOCKNUT | 1 | STEEL |
| 13 | M6 LOCKNUT | 1 | STEEL |
| 14 | BATTERY CLIP | 1 | AS SUPPLIED |
| 15 | INSULATED WIRE | AS REQUIRED | AS SUPPLIED |
| 16 | BULB HOLDER | 1 | AS SUPPLIED |
Design Element
| Part No. | Part Name | Required | Material and Description | Possible Design |
| 17 | BATTERY HOLDER | 1 | AS DESIGNED | |
Zip Files
Download all Solidworks Parts : - 1.4MB
Download all Solidworks Drawings : - 1.7MB
Download all PDFs of Solidworks Drawings : - 424kB
Download Solidworks Assembly including all Parts : - 8.8MB
Download Assembly Pictures : - 223KB
Download All : - 11.2MB
