Engineering - Exam Papers - Practical - 1999 -
150 Marks
Parts List
| Part No. | Required | Material | Solidworks Part | Solidworks Drawing | |
| 1 | 1 | Aluminium |  |
 |
 |
| 2 | 1 | Mild Steel | |
|
|
| 3 | 1 | Clear Polycarbonate | |
|
|
| 4 | 1 | Clear Polycarbonate | |
|
|
| 5 | 1 | Brass | |
|
|
| 6 | 1 | Mild Steel | |
|
|
| 7 | 1 | Aluminium | |
|
|
| 8 | 1 | Mild Steel | |
|
|
As Supplied
| Part No. | Description | Required | Material and Description |
| 9 | M5x15 SET SCREW | 1 | Brass or Steel |
| 10 | M6x15 SET SCREW | 2 | Brass or Steel |
| 11 | Spring | 1 | Steel |
Equipment List
Usual marking-out and measuring tools.
Usual bench fitting tools and equipment.
Scribing block and surface plate (one per five candidates).
M6 taper and plug taps (to suit machine screws) and suitable tapping wrench.
Set of drills; Ø4.2, Ø5, Ø6, Ø10, Ø12, with spares.
Set of usual files, to include:
250mm hand bastard.
250mm hand smooth.
150mm hand bastard.
150mm hand smooth.
150mm half round bastard.
150mm half round smooth.
150mm round bastard.
150mm round smooth.
150mm warding smooth.
1 set of needle files per five candidates.
Hacksaws, junior and standard, with blades.
One pair of aluminium or fibre protective vice clamps.
Screwdriver to suit machine screws supplied.
Half sheet of fine grade emery cloth per candidate.
Half sheet of medium grade emery cloth per candidate.
Figure and letter punches.
Light clear rust preventive aerosol spray.
Protective goggles at all machines.
Soldering iron
Solder
Flux
Protective clothing
Zip Files
Download all Solidworks Parts : - 1.2MB
Download all Solidworks Drawings : - 1.6MB
Download all PDFs of Solidworks Drawings : - 473KB
Download Solidworks Assembly including all Parts : - 3.6MB
Download Assembly Pictures : - 454KB
Download All : - 6.2MB
